Adel Trinity 788 User Manual download pdf (Page 5)

a) Press the on battery cover button, slide the battery cover upward and remove it, you can see

one hole at each side, and inside each hole there is a button for setup;

Specific operations:

Trinity 788 Operation Manual

b) Remove either of the four batteries, pressing the buttons on the front side to confirm the power

is successfully cut off, then insert into the two holes to press the buttons inside with two slim

objects (e.g. iron wire) at the same time, hold it tight (not to release), and reload the battery. The

lock is then re-powered, if you hear a toot sound after 5 seconds, the initialization of the lock is

successfully completed, and you may loose the slim objects.

Note:

After initialization of the lock, all the enrolled fingerprints and password in the lock are cleared,

and the lock resumes to the new lock state (factory setting). Any finger can open the door, and

master fingerprints, member fingerprints, as well as spare passwords need to be set again.

III. Enrollment of master fingerprints / member fingerprints

Enrollment of master fingerprints (take user 01 as an example)

Operational procedure

Indication of the lock

In the state of new lock, put any finger on the fingerprint

collection window to enter the door open state

Green light is on, and the LED displays --

Press Button + to enter the enrollment mode

A beep sound heard, and the LED displays 0-

Press Button + or - to adjust the first digit 0 of the

fingerprint code, and press Button # to confirm the choice

The tens place displays the figure that has just

been set, while the ones place displays 0

Continue to press Button + or - to adjust the second digit

1 of the fingerprint code, and press Button # to confirm

The LED displays the fingerprint

code 01 flashing

Press Button # to reconfirm

the fingerprint code 01

The LED displays fingerprint code 01 ,

with red light on the fingerprint window

Put the finger to be enrolled on the fingerprint

collection window, and collect twice

When the red light of the fingerprint window is on,

press with the finger; after the beep, remove the finger

and press one more time. A long beep will sound and

the two collections are successfully completed

The LED displays the code 01 and enrollment

finished. Light on fingerprint window turns off and the

LED displays 0- ,continue to set other fingerprints

The first master fingerprint is set

07 08

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Adel Trinity 788 User Manual Page 5

Comments to this Manuals

Related products and manuals for Unknown Adel Trinity 788